Views: 0 Author: Site Editor Publish Time: 2025-12-22 Origin: Site
The HSK63F-DL30 Saw Blade Holder is a high-precision, high-rigidity tool holder for manual or dedicated machine installation, designed to hold circular saw blades with a 30mm center bore. It is widely used in the field of precision metal sawing and grooving.
The HSK63F short taper combined with a large flange and the robust design of the DL front end can withstand the significant radial and axial cutting forces encountered during sawing.
For cutting profiles (e.g., aluminum extrusions, steel bars, tubes).
Installing thin slotting saw blades for precision grooving or parting.
Compatible Saw Blades: Must use saw blades with a center bore of 30mm (Φ30H7). Also, select the appropriate blade tooth geometry, material, and coating based on the material being cut (aluminum, steel, stainless steel, etc.).
Fastening Method: The DL-type holder typically uses a central drawbolt (or screw) to clamp the saw blade against the holder's face. Always use a torque wrench during installation and tighten to the torque specified in the manual. This prevents under-tightening (which can cause slippage and danger) and over-tightening (which can damage threads or the holder).
The HSK63F-DL30 Saw Blade Holder is a high-precision, high-rigidity tool holder for manual or dedicated machine installation, designed to hold circular saw blades with a 30mm center bore. It is widely used in the field of precision metal sawing and grooving.
This is our company product HSK63F-DL30 Saw Blade Holder,if you are interested in,please remember to contact with us freely.
